cm工程机建议升级吗？

1172884664 · 发表于 2020-4-25 08:45:28

critor 发表于 2020-4-25 07:33
Yes, if you can. :)
Thanks.

（CM）OS3.1.0.319.7z.001 (2 MB, 下载次数: 29)

（CM）OS3.1.0.319.7z.002 (2 MB, 下载次数: 23)

（CM）OS3.1.0.319.7z.003 (2 MB, 下载次数: 30)

（CM）OS3.1.0.319.7z.004 (2 MB, 下载次数: 23)

（CM）OS3.1.0.319.7z.005 (616.83 KB, 下载次数: 27)

critor · 发表于 2020-4-26 03:34:46

Thank you very much; it's ok, it works on the emulator :

So now that you have access to a more 'normal' CM for the moment and that its OS is saved, could you try to :
- udate your DVT1 to 3.1.0.392
- install Ndless on your DVT1
- send the tempOS tool to your DVT1
- send the 3.1.0 OS from your EVT1 to your DVT1
- launch tempOS on your DVT1 just before the OS gets rejected and erased (before the shown progress bar reaches 50%) ?

1172884664 · 发表于 2020-4-26 11:58:58

critor 发表于 2020-4-26 03:34
Thank you very much; it's ok, it works on the emulator :

@critor
The EVT1 display "Wrong handheld type" .I think EVT1 is recognized as CX, but when I send it to a normal CX, it also display "Wrong handheld type" .

critor · 发表于 2020-4-26 17:27:50

Thanks for trying so promptly.

No Nlaunch on the normal CX/CM here ?
Since Nlaunch is blocking OS updates.

1172884664 · 发表于 2020-4-26 17:39:55

critor 发表于 2020-4-26 17:27
Thanks for trying so promptly.

No Nlaunch on the normal CX/CM here ?

The normal CX/CM without nlaunch.

critor · 发表于 2020-4-26 17:44:18

Ok, thank you very much for all the time you took for the calculator community.

I'm going to check the .exe here since as soon as possible, since it seems it's the only choice left.
It might have been hard-coded for the CX.

1172884664 · 发表于 2020-5-21 11:48:52

critor 发表于 2020-4-26 17:44
Ok, thank you very much for all the time you took for the calculator community.

I'm going to check ...

@critor
Today I got a CM CAS DVT1 ,OS Version is 3.1.0.319.

CM CAS_3.1.0.319.7z.001 (2 MB, 下载次数: 16)

CM CAS_3.1.0.319.7z.002 (2 MB, 下载次数: 22)

CM CAS_3.1.0.319.7z.003 (2 MB, 下载次数: 18)

CM CAS_3.1.0.319.7z.004 (1.9 MB, 下载次数: 17)

critor · 发表于 2020-7-12 16:56:52

Thank you very much.

Any pictures this time ?

账号		自动登录	找回密码
密码			注册

[Nspire] cm工程机建议升级吗？